Button tips shipped standard; see accessories to purchase optional finials.
Shipped assembled with pins installed
Stainless steel, rust-proof pin is knurled at the top to prevent rising, yet is "free-floating" within the barrel of the hinge
May be used on wood or hollow metal doors and corresponding frames; please call our toll-free customer support to order with machine screws for metal doors
Mounting templates are available; do not use the hinges to make cut outs on metal doors and frames
NOTE: Doors equipped with closers should always have ball bearing hinges.
How to Determine Proper Hinge Height
Thickness of Door
Width of Door
Height of Hinges
1-3/8"
to 32"
3½"
1-3/8"
Over 32" to 37"
4"
1¾"
to 36"
4" or 4½"
1¾"
Over 36" to 48"
4½" or 5"
2"-2½"
Over 42"
5"
Number of Hinges Required on Doors
Door Height
Hinges Required
To 60"
2 Hinges
61" to 90"
3 Hinges
91" to 120"
4 Hinges
Suggested location of hinges:
Top Hinge: 5" from jamb rabbet to top edge of hinge barrel.
Bottom Hinge: 10" from bottom edge of hinge barrel to finished floor.
Middle Hinge: Centered between the top and bottom hinges.
The above are U.S. standard prodecures.
Finial
Button
Materials
Solid brass
Shop Accessories
Item you're currently viewing: Omnia Industries 985 Full Mortise Door Hinge