area rugs

System Description
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2" serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8" thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.

The fiberglass mesh backing helps to hold the heating element in place for easy, fault-free installation. It also allows the system to be covered directly by the thinset cement used to lay tile or natural stone flooring.

Full room heating systems generally consist of a single Honeywell heating “roll" of predetermined length. The system is placed in position using the easy-to-follow floor layout diagram provided with each kit, with a pre-attached lead that runs to a thermostat and/or junction box for power. No additional installation wiring is required.

15-Watt/Sq. Ft. System
Honeywell floor heating systems are 15-watts per square foot, the maximum allowable by the National Electrical Code. They will raise floor and room temperatures to the desired setting more rapidly and yet, when partnered with our SmartStat programmable thermostat, use no more electricity than comparable 12 watt per square foot systems.

Energy Efficient & 100% Maintenance Free
Honeywell floor heating systems are energy efficient and environmentally friendly. Unlike conventional forced-air heating systems, electric radiant heat converts 100% of its energy into producing even, room-filling heat that envelopes the whole body in soothing warmth. Even when employing a full 10-hour on cycle, a Honeywell system will heat a large size family room or sunroom for less than $0.58 a day, and an oversized bathroom for considerably less. In addition to being energy efficient, Honeywell systems are 100% maintenance free, with no moving parts to wear out or filters to change.